產品標題:CV-QKBLDRQuick Builder快速生成器 - SCADA數據庫配置工具

型號： CV-QKBLDR

品牌：霍尼韋爾

                                                                    產品詳情資料：

接線

1、 硬件設備之間的連接

這種連接在控制室內部進行，大多采用多芯屏蔽雙絞線或同軸電纜，用標準化的插件插接。

這些電纜稱為系統電纜，種類多，所以工作時要仔細、謹慎，不能插錯，并做好檢查工作。

2、 DCS系統和在線儀表的連接

這是控制室與現場儀表的連接，量大點多，一般會有兩種形式：

l  一根電纜從頭到底，也就是現場儀表或執行機構的兩芯電纜直接連到控制室DCS系統相應的模件接線端子；

l  控制室通過多芯主電纜連接到現場點集中的地方，通過接線盒再分別用兩芯電纜與每個現場儀表或執行機構連接。

由于接線點數較多，每個點準確無誤，牢固可靠，排列整齊、美觀。

這組手冊包括（除其他外）：?緊急信息?一般信息?入門、IRC5和RobotStudio?RAPID簡介?帶FlexPendant的IRC5?RobotStudio？控制器和操縱器的故障排除。人員機器人無論其速度如何，都非常重且非常強大。運動暫停或長時間停止后，可能會出現快速危險運動。即使預測到移動模式，也可能會由外部信號觸發操作變化，從而導致意外移動。因此，在進入受保護的空間時，遵守所有規定

                          產品英文詳情資料：

connection

1. Connection between hardware devices

This type of connection is carried out inside the control room, mostly using multi-core shielded twisted pair or coaxial cables, with standardized plug-in connections.

These cables are called system cables and have a variety of types, so when working, it is necessary to be careful and cautious, never plug them in incorrectly, and do a good job of inspection.

2. Connection between DCS system and online instruments

This is the connection between the control room and on-site instruments, which has a large quantity and usually comes in two forms:

A cable is connected from the beginning to the bottom, that is, the two core cable of the on-site instrument or actuator is directly connected to the corresponding module wiring terminal of the DCS system in the control room;

The control room is connected to a centralized location on site through a multi-core main cable, and then connected to each on-site instrument or actuator through a junction box using two core cables.

Due to the large number of wiring points, each point must be accurate, firm, reliable, neatly arranged, and aesthetically pleasing.

The group of manuals includes (among others): ? Emergency safety information ? General safety information ? Getting started, IRC5 and RobotStudio ? Introduction to RAPID ? IRC5 with FlexPendant ? RobotStudio ? Trouble shooting, for the controller and manipulator.Safety of personnel A robot is heavy and extremely powerful regardless of its speed. A pause or long stop in movement can be followed by a fast hazardous movement. Even if a pattern of movement is predicted, a change in operation can be triggered by an external signal resulting in an unexpected movement. Therefore, it is important that all safety regulations are followed when entering safeguarded space.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。