天天爽天天爽夜夜爽毛片 ,久久热这里只有精品视频,免费一区二区三区精品,国产呦精品一区二区三区,日韩精品一区二区三区视频,久久久久精品久久久久,无码毛片视频一区二区本码,海天翼精品一区二区三区

行業產品

  • 行業產品

營派閥門(上海)有限公司


當前位置:營派閥門(上海)有限公司>>計量泵>>進口機械隔膜計量泵Germany Kaysen

進口機械隔膜計量泵Germany Kaysen

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號

品       牌

廠商性質經銷商

所  在  地上海市

聯系方式:李峰查看聯系方式

更新時間:2018-01-02 15:05:26瀏覽次數:771次

聯系我時,請告知來自 智慧城市網

經營模式:經銷商

商鋪產品:144條

所在地區:上海上海市

聯系人:李峰 (經理)

產品簡介

進口機械隔膜計量泵Germany Kaysen
●機械驅動PTFE膜片(多種隔膜材質)
●在泵運行或停止狀態均可調節流量
●安裝空間小
●多種材質及泵類結構可選
●穩定精度±2%(調節比10%-*)
●堅固耐用,維護成本低

詳細介紹

德國KAYSEN凱森泵業有限公司

Germany Kaysen Pump Co., Ltd.

凱森泵業總代理:營派閥門(上海)有限公司

詳細資料請登錄:營派閥門(上海)有限公司

進口機械隔膜計量泵Germany Kaysen

德國KAYSEN凱森進口機械隔膜計量泵概述

機械隔膜計量泵是電機通過直聯傳動帶動蝸輪蝸桿副作變速運動,在曲柄連桿機構的作用下,將旋轉運動轉變為往復直線運動。

滑桿與膜片直接連接,工作時滑桿往復運動時直接推(拉)動膜片來回鼓動,通過泵頭上的單向閥啟閉作用完成吸排目的,達到輸送液體的功能。2、是可以計量輸送液體的機械,也叫定量泵、比例泵。通常描述為:機械隔膜計量泵是一種可以滿足各種嚴格的工藝流程需要,流量可以在0-*范圍內無級調節,用來輸送液體(特別是腐蝕性液體)一種特殊容積泵。分類一:根據過流部分:一、柱塞、活塞式;二、機械隔膜式;三、液壓隔膜式。分類二:根據驅動方式:一、電機驅動;二、電磁驅動;三、氣動分類三:根據工作方式一、往復式二、回轉式;三、齒輪式其他的分類方式:電控型,氣控型,保溫型,加熱型,高黏度型等。

主要特點:

沖程在靜態及動態條件下均可調節

zui大額定流量Ф=500L/h

zui大排壓:P2=1.2Mpa

zui大介質溫度:-100C—1000C

泵調節范圍10%-100%流量精<+1%

可安裝隔膜破裂報警監測機構

多種材質泵頭可選(PVC、PCDF、PTFE、304、316L)

機械驅動PTFE膜片

手動/自動沖程調節/數字變頻控制均可選

 

主要優點:

機械驅動PTFE膜片(多種隔膜材質) 

在泵運行或停止狀態均可調節流量

安裝空間小     

多種材質及泵類結構可選

穩定精度±2%(調節比10%-*)

堅固耐用,維護成本低

主要應用:

石油化工

化工

電力

冶金

采礦

造船

輕工

農業

國防

進口機械隔膜計量泵Germany Kaysen

KAYSEN計量泵如何工作?

根據品牌和型號的不同,計量泵具有多種不同的方法。所有這些方法都需要測量一定量的化學品,然后將該產品注入管道或類似的容器中。計量泵設置有幾個主要部分:

1. 化學罐或容器。正在計量的產品,

2. 腳踏閥。這是一個連接到吸氣管路上的單向閥。將其放入產品桶中,使泵保持啟動狀態。它應該有一個重量,所以它仍然在產品的鼓桶的底部,有時它有一個浮動開關連接到它,所以泵有警報激活,如果產品用完了。

3. 泵本身。這可以在尺寸和材料上有所不同,但通常是各種耐化學腐蝕的塑料(PVC,PE或類似的),橡膠或不銹鋼。它有一個吸入管線連接到入口和計量管線連接到吸入。泵的機構可能會有所不同(見下文)。

4. 計量管線通常是相當堅硬的PVC或PE管或增強軟管。偶爾在蒸汽,熱水或超高壓應用中,生產線可以是不銹鋼。這可以有各種排氣,減壓,放氣閥,但通常只是一條線。

5. 注射器。在產品注入產品的那一刻,有一個注射器點。這是一個單向閥,因此當計量泵將一定量的產品推入生產線時,它可以克服輸送管道中的壓力,并使產品流出。一旦產品釋放或泵停止運行,單向閥就會阻止輸送管線中的液體上升到計量管路并損壞泵。注射器也有一個噴嘴,使產品被輸送到流體的中間而不是側壁。隨著時間的推移,某些產品,尤其是酸和氧化劑,如氯或過氧化物,會腐蝕管道的壁,如果在流的邊緣釋放的話。

6. 控制系統。偶爾會有一個控制系統安裝,以確保計量泵的準確性,并在特定的時間打開和關閉。這可以像計時器或流量開關一樣簡單,直到整個SCADA或類似的*控制系統,具有用于pH,氯氣和類似的可變速率控制的傳感器來提高和降低被計量的水平。它也可能被整合到更復雜的操作系統中。

How does Kaysen metering pump work?

Depending on the brand and model, metering pumps have many different ways. All of these methods require the measurement of a certain amount of chemicals, which is then injected into a pipe or similar container. The metering pump setup has several main parts:

Chemical tank or container The product being measured,

2. Foot valve. This is a one-way valve connected to the suction line. Put it in the product bucket and keep the pump on. It should have a weight so it is still at the bottom of the product drum and sometimes it has a float switch connected to it so the pump has an alarm activated if the product runs out.

The pump itself. This can vary in size and material but is usually a variety of chemically resistant plastics (PVC, PE or similar), rubber or stainless steel. It has a suction line connected to the inlet and a metering line connected to the suction. The mechanism of the pump may vary (see below).

4. The metering line is usually quite rigid PVC or PE pipe or reinforced hose. Occasionally in steam, hot water or extra high pressure applications, the line can be stainless steel. This can have a variety of exhaust, decompression, deflation valve, but usually just a line.

Syringe. At the moment the product is injected into the product, there is a syringe point. This is a one-way valve so when the metering pump pushes a certain amount of product into the line it can overcome the pressure in the delivery line and allow the product to flow out. Once the product is released or the pump is out of service, the check valve will prevent liquid in the transfer line from rising to the metering line and damaging the pump. The syringe also has a nozzle that allows the product to be delivered to the center of the fluid rather than the side wall. Over time, certain products, especially acids and oxidizers, such as chlorine or peroxide, can corrode the walls of the pipe if released at the edges of the stream.

6. Control system. Occasionally there is a control system installed to ensure the accuracy of the metering pump and to open and close at a specific time. This can be as simple as a timer or flow switch until the entire SCADA or similar central control system has sensors for pH, chlorine and similar variable rate control to raise and lower the metered level. It may also be integrated into more complex operating systems.


感興趣的產品PRODUCTS YOU ARE INTERESTED IN

智慧城市網 設計制作,未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.mms47.com,All rights reserved.

以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,智慧城市網對此不承擔任何保證責任。 溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~
主站蜘蛛池模板: 铁岭市| 晋江市| 遂宁市| 湖南省| 烟台市| 东明县| 冀州市| 吉安县| 洪泽县| 广汉市| 正安县| 石林| 金秀| 温宿县| 张家口市| 烟台市| 贵阳市| 龙泉市| 沂南县| 肃北| 定西市| 黔江区| 温泉县| 黄浦区| 凤庆县| 旬阳县| 濮阳县| 瓮安县| 米易县| 公主岭市| 商水县| 衡南县| 郓城县| 东宁县| 南澳县| 嵊泗县| 嘉鱼县| 望都县| 济阳县| 嵊州市| 长岭县|